- Create custom lighting effects with this 44-key IR remote control and LED control unit.
- Specifically designed to work with 12 VDC RGB LED light ThinGlow strips.
- Adjust brightness, color, fade in/out, and flash rate.
- Supports up to five meters of RGB LED light strips.
- Tricolor, common anode LEDs may be used if configured to work with 12 VDC supply voltage by the use
of voltage dropping resistors. - IR remote control uses a CR2025 battery (included).
Epic IR controllers
Infrared LED controllers
EP-IR-RGB-STANDARD
- Epic's EP-IRL Learner is a must-have tool for every dealer, installer, and home automation enthusiast.
- The compact EP-IRL is used with a PC to learn the full spectrum, 30KHz to 500KHz, of IR codes that
control infrared driven equipment. - Learned code is displayed, converted into other formats, and automatically copied into the Windows clipboard.
- Codes can then be pasted into any Windows application to facilitate quick database and/or
spreadsheet creation and updating. - The stored codes can be used to control and automate any device that accepts infrared control signals, from any networked computer, and over the Internet.
- The EP-IRL power is supplied by the RTS line of the serial port and requires no external power supply.
EP- IR-Extender
The Epic Sky Technology's EP-IRE IR Extender extends infrared capability by converting IR signals to digital data, which can then be read from any PC or RS232 serial port. The EP-IRE is designed for use with various IR input devices to capture IR commands that can be recorded, played back, and used to initiate actions across a network. For the first time, an IR device, such as a remote control, can be used as an input device for equipment control throughout the home. For instance, by pressing a button on your bedroom remote you can adjust lighting, set your home’s temperature, and lower shades. The EP-IRE is the first IR extender able to support the full IR frequency spectrum from 30KHz to 500KHz.
EP- IR-BLASTER
The EP-BL is designed for use with theEpic Sky Technology's EP-100 Network Adapters to transmit IR signals across a room up to 40 feet. No power supply or connecting block is required for use. With an IR modulation frequency range of 30 – 500 kHz, and transmitting up 40 feet, the EP-BL is the obvious solution to any IR signal strength problem. The EP-BL employs a standard 3.5mm stereo plug and 6ft cable for easy connection and installation for use with the EP-100 Network Adapter.
LED CONTROLLERS
NEW 2020 PRODUCTS
HEALTHCARE LIGHTING
SUNSET EFFECT CONTROLLER
MUSIC TO LIGHT CONTROLLER
LIGHTED WALL ART
STEP LIGHTING
PRODUCTS
-
Star Panels and Kits
Admiring the night sky can be even more enjoyable indoors.
-
Clear Form LED Signage
Theatrical Lighted signage.
-
Clear Form LED Posters
Theatrical Lighted signage.
-
LED Step Lightings
Upper signal illumination and bottom stair tread light.
-
LED Down, floor and Step Lighting
Upper signal illumination and bottom stair tread light.
-
LED Cove Lighting
Create custom lighting effects with this 44-key IR remote control and LED control unit.