Epic LED Power supplies

ACCESSORIES for led lighting systems

DR-45-spec

LED power supply

Universal AC input/Full range

Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment) approved
LED indicator for power on
100% full load burn-in test
Fix switching frequency at 100KHz
3 years warranty Specification

Categories : LED Accessories

DR-120-spec

LED power supply

AC input range selectable by switch
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment) approved
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 55KHz Specification

Categories : LED Accessories

DRP-240-spec

LED power supply Universal AC input / Full range
Built in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment) approved
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 100KHz
3 years warranty Specification
Categories : LED Accessories

DRP-480S-spec

LED power supply
AC input range selectable by switch
Built-in passive PFC function compliance to EN61000-3-2
High efficiency 89% and low dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment) approved
EN61000-6-2(EN50082-2) industrial immunity level
100% full load burn-in test Specification
Categories : LED Accessories

MDR-20-spec

LED power supply
Universal AC input/Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
No load power consumption<0.75W
100% full load burn-in test Specification
Categories :LED Accessories

MW-DR-75-spec

LED power supply
Universal AC input / Full range
Protections:Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment) approved
LED indicator for power on
100% full load burn-in test
Fix switching frequency at 50KHz Specification
Categories :LED Accessories

SDR-960-spec

LED power supply
AC input 180~264VAC only
130% p
110mm slim design
High efficiency 94% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL508(industrial control equipment) approved
EN61000-6-2(EN50082-2) industrial immunity level
Current sharing up to 3840W(3+1)
Built-in DC OK relay contact
100% full load burn-in test Specification
Categories : LED Accessories

WDR-120-spec

LED power supply
Single and two phase wide input range 180 ~ 550VAC
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
EN61000-6-2(EN50082-2) industrial immunity level
100% full load burn-in test
Built-in
3 years warranty
UL508(industrial control equipment)approved
DC OK relay contact Specification
Categories : LED Accessories

WDR-240-spec

LED power supply
Single and two phase wide input range 180~550VAC
High efficiency 91% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment) approved
EN61000-6-2(EN50082-2) industrial immunity level
Built-in DC OK relay contact
100% full load burn-in test Specification
Categories : LED Accessories

WDR-480-spec

LED power supply

Single and two phase wide input range 180~550VAC
High efficiency 93% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
EN61000-6-2(EN50082-2) industrial immunity level
Built-in DC OK relay contact
100% full load burn-in test Specification

Categories : LED Accessories